What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
14.06.2025 04:17

This is where this question deviates from being a 'generic' question, and becomes more specific.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
Why did Kakashi use Chidori against Rin, despite knowing about her feelings for Obito?
There are two important concepts here.
so, what happens?
The third is lightning and “how it gets conducted into a home.”
Do crossdressers like wearing pantyliners and tampons in their butts?
Here is a simplified AC power diagram.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
These devices are installed between the “hot” and “neutral” and protective ground.
This is 'the assistant's answer'
One is “what exactly is in a ‘surge protector’ ? ”
At least they know the answer if they wanted it.
2024–10–10[John johnson John Johnson ]
This device then solves the entire problem.
I post the exact comment here.
How do I become an intelligent man?
[old diagram got deleted by accident]
It seems Mohan does not understand the difference between a comment and an Answer.
but this device (an Inductor) … impedes the rapid changes in the current.
What are some common examples of human hypocrisy?
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
But it can get overloaded, and no longer works.
[image of Common-mode choke]
One
At one ohm, the resistor has a maximum of 1 watt power.
He then describes the function of a fuse.
This one hit behind the barn.
So, the voltage could go up to 500 volts, and the fuse will not open up.
NASA Science Community Budget Meeting POSTPONED - NASA Watch
the problem then depends on "how fast does the fuse operate?".
Now when you have a certain ac resistance, then a current flows in a loop.
but I think this circuit , shows a few more pieces.
eight
Barnstars:
This is where the MOV conducts again, and dissipated the energy.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
In schematic diagrams this is the symbol for a fuse:
What does a fuse do?
But… the neutral is now “floating” because of the 1 ohm resistance.
A fuse is a non-resetable over current circuit protector.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
Free agent LB Germaine Pratt agrees to terms with Raiders - NBC Sports
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
The bolt then partially travels down the line to your home.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
2024–10–16 [ OO OLAOYE OYEBODE ]
a photo is worth a thousand words.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
For this case there are devices called Metal oxide varistors (MOV).
The other is “what does a “fuse” do?”
A circuit breaker is similar, but is resettable.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
It also is a device that limits the change in current flow.
What is lightning?
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
(Dc diagram shown, AC is similar).
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
2024–10–14 [Omar Gharbi Omar Gharbi ]
Edit 2024–10.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
The MOV will conduct when the voltage exceeds 50% of line voltage.
First Sentence:
He then asserts :
There are three different concepts here that are getting confused.
These are simplified answers to the original question, and does not change anything I wrote above.
nine
An AC voltage/ current source, and an ac inductive load.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
He then describes Rainy Season and Lightning.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
what exactly is a ‘surge’ protector?
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
Because the load is inductive, the current lags the voltage.(by a bit).
This is the picture of an electronic coil of wire wound around a core of magnetic material.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
Upvotes:
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.